What are the classification of sugar pot?
Sugar pot is composed of pot body, lid, jacket, agitator, transmission device, shaft seal device, support, etc. When the height diameter ratio of the mixing device is large, the multi-layer mixing paddle can be used, and the mixing paddle can also be optionally selected according to the user's requirements. A jacket is arranged outside the boiler wall, or a heat exchange surface is arranged inside the boiler, or heat exchange can be conducted through external circulation. The supporting seat has supporting type or ear type support, etc. Gear reducer should be used when the rotating speed is more than 160. The number, specification or other requirements of opening can be designed and manufactured according to the user's requirements.
1. Packing seal is usually used under normal pressure or low pressure, and the pressure is generally less than 2kg.
2. In general, mechanical seal will be used under medium pressure or vacuum pumping, and the general pressure is negative pressure or 4kg.
3. Magnetic seal will be used in case of high pressure or medium volatility, and the general pressure is more than 14kg. In addition to the magnetic seal using water cooling, other forms of sealing more than 120 degrees will increase the cooling water jacket.
Classification of sugar pot:
1. According to the heating / cooling mode, it can be divided into electromagnetic heated sugar soaking pot, hot water heating sugar soaking pot, heat-transfer oil circulation heating sugar soaking pot, far-infrared heating sugar soaking pot, external (internal) coil heating sugar soaking pot, jacket cooling and internal coil cooling, etc. The choice of heating mode is mainly related to the heating / cooling temperature required for chemical reaction and the amount of heat required.
2. According to the material of the pot, it can be divided into carbon steel sugar pot, stainless steel sugar pot, glass lined sugar pot (enamel sugar pot) and steel lined sugar pot.
2.1 carbon steel sugar pot
Scope of application: environment without corrosive liquid, such as some oil processing.
2.2 stainless steel sugar pot (kcfd series high pressure sugar pot)
Stainless steel sugar pot
1. Heating structure type
electromagnetic heated type, jacketed type, outer half pipe type and inner coil pipe type, with a volume of 0.01m3-45m3
2. Material
Carbon steel, stainless steel, high temperature resistant stainless steel, strong acid and alkali resistant stainless steel, enamel or PP material, etc.
3. Mixing type
Diagonal type, anchor type, frame type, push type and single (double) screw type, and other types of blades can be designed and manufactured according to customer requirements [1].
Scope of application: it is suitable for high temperature and high pressure chemical reaction test in petroleum, chemical industry, medicine, metallurgy, scientific research, colleges and universities, etc. it is used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, alkylation, polymerization, condensation, heating mixing, constant temperature reaction and other technological processes, and can achieve high mixing effect for viscous and granular substances.
2.3 glass lined sugar pot
Scope of application: widely used in petroleum, chemical, food, medicine, pesticide, scientific research and other industries.
2.4 steel lined PE sugar pot
Scope of application: applicable to acids, alkalis, salts and most alcohols. Applicable to liquid food and drug refining. It is an ideal replacement for rubber lining, FRP, stainless steel, titanium steel, enamel and plastic welding plate.
2.5 steel lined ETFE sugar pot
Scope of application: excellent anti-corrosion performance, resistant to acid, alkali, salt, strong oxidant, organic compound and all other strong corrosive chemical media.
3. According to the working internal pressure, it can be divided into normal pressure sugar pot, positive pressure sugar pot and auxiliary pressure sugar pot.
4. According to the mixing form, it can be divided into paddle type, anchor type, frame type, screw belt type, turbine type, dispersion disc type, combination type, etc.
5. According to the heat transfer structure, it can be divided into jacket type, outer half tube type, inner disc tube type and combined type.
Sugar pot is composed of pot body, lid, jacket, agitator, transmission device, shaft seal device, support, etc. When the height diameter ratio of the mixing device is large, the multi-layer mixing paddle can be used, and the mixing paddle can also be optionally selected according to the user's requirements. A jacket is arranged outside the boiler wall, or a heat exchange surface is arranged inside the boiler, or heat exchange can be conducted through external circulation. The supporting seat has supporting type or ear type support, etc. Gear reducer should be used when the rotating speed is more than 160. The number, specification or other requirements of opening can be designed and manufactured according to the user's requirements.
1. Packing seal is usually used under normal pressure or low pressure, and the pressure is generally less than 2kg.
2. In general, mechanical seal will be used under medium pressure or vacuum pumping, and the general pressure is negative pressure or 4kg.
3. Magnetic seal will be used in case of high pressure or medium volatility, and the general pressure is more than 14kg. In addition to the magnetic seal using water cooling, other forms of sealing more than 120 degrees will increase the cooling water jacket.
Classification of sugar pot:
1. According to the heating / cooling mode, it can be divided into electromagnetic heated sugar soaking pot, hot water heating sugar soaking pot, heat-transfer oil circulation heating sugar soaking pot, far-infrared heating sugar soaking pot, external (internal) coil heating sugar soaking pot, jacket cooling and internal coil cooling, etc. The choice of heating mode is mainly related to the heating / cooling temperature required for chemical reaction and the amount of heat required.
2. According to the material of the pot, it can be divided into carbon steel sugar pot, stainless steel sugar pot, glass lined sugar pot (enamel sugar pot) and steel lined sugar pot.
2.1 carbon steel sugar pot
Scope of application: environment without corrosive liquid, such as some oil processing.
2.2 stainless steel sugar pot (kcfd series high pressure sugar pot)
Stainless steel sugar pot
1. Heating structure type
electromagnetic heated type, jacketed type, outer half pipe type and inner coil pipe type, with a volume of 0.01m3-45m3
2. Material
Carbon steel, stainless steel, high temperature resistant stainless steel, strong acid and alkali resistant stainless steel, enamel or PP material, etc.
3. Mixing type
Diagonal type, anchor type, frame type, push type and single (double) screw type, and other types of blades can be designed and manufactured according to customer requirements [1].
Scope of application: it is suitable for high temperature and high pressure chemical reaction test in petroleum, chemical industry, medicine, metallurgy, scientific research, colleges and universities, etc. it is used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, alkylation, polymerization, condensation, heating mixing, constant temperature reaction and other technological processes, and can achieve high mixing effect for viscous and granular substances.
2.3 glass lined sugar pot
Scope of application: widely used in petroleum, chemical, food, medicine, pesticide, scientific research and other industries.
2.4 steel lined PE sugar pot
Scope of application: applicable to acids, alkalis, salts and most alcohols. Applicable to liquid food and drug refining. It is an ideal replacement for rubber lining, FRP, stainless steel, titanium steel, enamel and plastic welding plate.
2.5 steel lined ETFE sugar pot
Scope of application: excellent anti-corrosion performance, resistant to acid, alkali, salt, strong oxidant, organic compound and all other strong corrosive chemical media.
3. According to the working internal pressure, it can be divided into normal pressure sugar pot, positive pressure sugar pot and auxiliary pressure sugar pot.
4. According to the mixing form, it can be divided into paddle type, anchor type, frame type, screw belt type, turbine type, dispersion disc type, combination type, etc.
5. According to the heat transfer structure, it can be divided into jacket type, outer half tube type, inner disc tube type and combined type.
Contact Us:
Shandong Longze Machinery Co.,Ltd
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.