Gas cooking jacketed kettle_ Code for use and operation of gas cooking mixer machine
Gas cooking jacketed kettle_ Use and operation of gas cooking mixer machine:
（1） Installation
1. When the gas interlayer fcooking mixer machine is installed, the equipment shall be placed in a room with good ventilation conditions. It is required that the ground is flat and solid, the size of the ground is appropriate, and there is enough space for personnel to operate; after the equipment is placed in the preselected site, the boiler body shall be leveled by adjusting the fixing feet to ensure stable and reliable operation, and fixed with anchor bolts.
2. Under the equipment, there should be a trough with smooth drainage, and a cold and hot water pipe should be installed on the side of the pot, so as to add water and wash the pot when cooking.
3. The gas cooking mixer machine is connected with the gas pipeline. Before starting the gas piping operation, it is necessary to confirm that the type of gas supplied is the same as that used in the fcooking mixer machine; the connection of gas pipes must be carried out by special technical personnel. After the connection, the connection of each gas pipe shall be checked for leakage to ensure that the gas pipe is tight.
4. Adjustment of gas pressure. Adjust the gas pressure according to the following table before use. In addition, it should be confirmed that the dynamic pressure of the surrounding gas appliances when they are used at the same time should meet the requirements. Gas type rated working pressure (PA) liquefied petroleum gas 2800 natural gas 2000 artificial gas 1000
5. Check and confirm that there are standard power sockets that meet the requirements, check and confirm that there are grounding protection systems that meet the standards and that they are reliably connected with the grounding bolts of the equipment.
Gas cooking jacketed kettle_ Gas cooking mixer machine equipment is a series of products, mainly composed of the body, air intake, tipping, mixing and rack. The pot body is made of SUS304 stainless steel, and the outer pot body is welded with exhaust port. The air intake part is composed of universal ball joint and pipeline. The tilting part is composed of worm gear, worm, hand wheel and bearing seat.
Gas cooking jacketed kettle_ Basic structure and installation of gas cooking mixer machine
1) General structure: the fixed (vertical) type is mainly composed of the pot body and legs; the fixed (vertical) type is mainly composed of the pot body, legs and agitators; the tilting type is mainly composed of the pot body and the tilting installation; the tilting type is mainly composed of the pot body tilting device and the agitator;
2) . tighten the two set screws on the bracket. When rotating the pot body, the inlet pipe and outlet pipe at both ends are not allowed to rotate with the pot.
3) . after installation, the agitated steamer shall be put into operation after the empty car test run inspection and the rotating parts are in normal operation.
4) . after steam admission, if the joint leaks, screw the nut until it does not leak.
Gas cooking jacketed kettle_ Features of gas cooking mixer machine:
1. Full combustion, smoke-free and dust-free, a small amount of carbon deposition, no environmental pollution.
2. The flame temperature can be adjusted at will, and the temperature can reach about 300 ℃.
3. Reasonable structure and convenient operation.
4. Strong energy saving, fierce fire, thermal efficiency is about 25% higher than similar products.
5. Fuel: liquefied petroleum gas, pipeline gas, natural gas, oil is strictly prohibited.
6. Gas consumption: about 20% lower than similar products.
Gas cooking jacketed kettle_ Gas cooking mixer machine configuration:
1. Mixing mode: frame type wall scraping mixing paddle, with directional flow resistance paddle, power 0.75kw, rotating speed 0-60rpm, delta frequency converter speed regulation, Siemens (Bede motor), OST reducer. Mixing paddle material: SUS304 stainless steel; scraper material: polytetrafluoroethylene.
2. Sealing form: mechanical seal.
3. Cover opening method: manhole cover opening.
4. Discharge method: discharge or press the bottom valve.
5. Temperature display: thermal resistance thermometer (less than or equal to 140 ℃).
6. Vacuum degree: pressure vacuum gauge, vacuum gauge ≤ - 0.09mpa.
7. Heating and cooling mode: jacketed electric heating and tap water cooling.
8. Capacity design: design capacity 130L, working capacity 100L.
9. Main process parameters: jacket working pressure 0.03mpa, inner pot working pressure -0.09-0.02mpa.
10. Material: SUS304 stainless steel for inner pot, 6mm thick, SUS304 stainless steel for jacket, 6mm thick, SUS304 stainless steel for shell, 3mm thick. 11. Upper pot cover: Material: SUS304 stainless steel, thickness: 6mm, attached (vacuum pressure gauge, vent valve, vacuum port, sight glass lamp, sight glass port with scraper, manhole, spice funnel;).
12. Polishing grade: the inner part and exposed part of the pot are more than 300 mesh.
13. Vacuum pump: water ring vacuum pump 0.55kw, Zibo brand.
14. Heating mode: electric heating, heating power 6kw * 2 pieces equal to 12KW, heating time of the whole boiler is about 10 minutes. 15. Recommended operating platform for more than 300L: with step stool and patterned anti-skid aluminum plate 16. Jacket liquid level display: magnetic flap liquid level gauge
Negotiate a deal
① For network or telephone negotiation, our business personnel will introduce equipment related information in detail, including equipment performance advantages, price, transportation, after-sales service, etc. on the phone or with the help of Internet communication tools.
② Customers to visit the factory, when we will be the greatest sincerity and the most enthusiastic hospitality, welcome to visit the factory at any time.
③ The business personnel introduce the equipment to the customer. We can adjust our schedule according to your schedule. Customer convenience is our convenience and customer benefit is our best interest.
For cooking mixer machine more products,please click:https://www.candyfiremixer.com/cookingmixermachine/
Gas cooking jacketed kettle_ Use and operation of gas cooking mixer machine:
（1） Installation
1. When the gas interlayer fcooking mixer machine is installed, the equipment shall be placed in a room with good ventilation conditions. It is required that the ground is flat and solid, the size of the ground is appropriate, and there is enough space for personnel to operate; after the equipment is placed in the preselected site, the boiler body shall be leveled by adjusting the fixing feet to ensure stable and reliable operation, and fixed with anchor bolts.
2. Under the equipment, there should be a trough with smooth drainage, and a cold and hot water pipe should be installed on the side of the pot, so as to add water and wash the pot when cooking.
3. The gas cooking mixer machine is connected with the gas pipeline. Before starting the gas piping operation, it is necessary to confirm that the type of gas supplied is the same as that used in the fcooking mixer machine; the connection of gas pipes must be carried out by special technical personnel. After the connection, the connection of each gas pipe shall be checked for leakage to ensure that the gas pipe is tight.
4. Adjustment of gas pressure. Adjust the gas pressure according to the following table before use. In addition, it should be confirmed that the dynamic pressure of the surrounding gas appliances when they are used at the same time should meet the requirements. Gas type rated working pressure (PA) liquefied petroleum gas 2800 natural gas 2000 artificial gas 1000
5. Check and confirm that there are standard power sockets that meet the requirements, check and confirm that there are grounding protection systems that meet the standards and that they are reliably connected with the grounding bolts of the equipment.
Gas cooking jacketed kettle_ Gas cooking mixer machine equipment is a series of products, mainly composed of the body, air intake, tipping, mixing and rack. The pot body is made of SUS304 stainless steel, and the outer pot body is welded with exhaust port. The air intake part is composed of universal ball joint and pipeline. The tilting part is composed of worm gear, worm, hand wheel and bearing seat.
Gas cooking jacketed kettle_ Basic structure and installation of gas cooking mixer machine
1) General structure: the fixed (vertical) type is mainly composed of the pot body and legs; the fixed (vertical) type is mainly composed of the pot body, legs and agitators; the tilting type is mainly composed of the pot body and the tilting installation; the tilting type is mainly composed of the pot body tilting device and the agitator;
2) . tighten the two set screws on the bracket. When rotating the pot body, the inlet pipe and outlet pipe at both ends are not allowed to rotate with the pot.
3) . after installation, the agitated steamer shall be put into operation after the empty car test run inspection and the rotating parts are in normal operation.
4) . after steam admission, if the joint leaks, screw the nut until it does not leak.
Gas cooking jacketed kettle_ Features of gas cooking mixer machine:
1. Full combustion, smoke-free and dust-free, a small amount of carbon deposition, no environmental pollution.
2. The flame temperature can be adjusted at will, and the temperature can reach about 300 ℃.
3. Reasonable structure and convenient operation.
4. Strong energy saving, fierce fire, thermal efficiency is about 25% higher than similar products.
5. Fuel: liquefied petroleum gas, pipeline gas, natural gas, oil is strictly prohibited.
6. Gas consumption: about 20% lower than similar products.
Gas cooking jacketed kettle_ Gas cooking mixer machine configuration:
1. Mixing mode: frame type wall scraping mixing paddle, with directional flow resistance paddle, power 0.75kw, rotating speed 0-60rpm, delta frequency converter speed regulation, Siemens (Bede motor), OST reducer. Mixing paddle material: SUS304 stainless steel; scraper material: polytetrafluoroethylene.
2. Sealing form: mechanical seal.
3. Cover opening method: manhole cover opening.
4. Discharge method: discharge or press the bottom valve.
5. Temperature display: thermal resistance thermometer (less than or equal to 140 ℃).
6. Vacuum degree: pressure vacuum gauge, vacuum gauge ≤ - 0.09mpa.
7. Heating and cooling mode: jacketed electric heating and tap water cooling.
8. Capacity design: design capacity 130L, working capacity 100L.
9. Main process parameters: jacket working pressure 0.03mpa, inner pot working pressure -0.09-0.02mpa.
10. Material: SUS304 stainless steel for inner pot, 6mm thick, SUS304 stainless steel for jacket, 6mm thick, SUS304 stainless steel for shell, 3mm thick. 11. Upper pot cover: Material: SUS304 stainless steel, thickness: 6mm, attached (vacuum pressure gauge, vent valve, vacuum port, sight glass lamp, sight glass port with scraper, manhole, spice funnel;).
12. Polishing grade: the inner part and exposed part of the pot are more than 300 mesh.
13. Vacuum pump: water ring vacuum pump 0.55kw, Zibo brand.
14. Heating mode: electric heating, heating power 6kw * 2 pieces equal to 12KW, heating time of the whole boiler is about 10 minutes. 15. Recommended operating platform for more than 300L: with step stool and patterned anti-skid aluminum plate 16. Jacket liquid level display: magnetic flap liquid level gauge
Negotiate a deal
① For network or telephone negotiation, our business personnel will introduce equipment related information in detail, including equipment performance advantages, price, transportation, after-sales service, etc. on the phone or with the help of Internet communication tools.
② Customers to visit the factory, when we will be the greatest sincerity and the most enthusiastic hospitality, welcome to visit the factory at any time.
③ The business personnel introduce the equipment to the customer. We can adjust our schedule according to your schedule. Customer convenience is our convenience and customer benefit is our best interest.
For cooking mixer machine more products,please click:https://www.candyfiremixer.com/cookingmixermachine/
Contact Us:
Shandong Longze Machinery Co.,Ltd
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.