Commercial popcorn machine can produce popcorn in large quantities
The popcorn machine uses a non-stick edible coating and is equipped with a stainless steel upper mixer, which can further improve the quality and output of food and greatly improve the production efficiency and quality of popcorn.
The Longze brand popcorn machine can burst butterfly-shaped popcorn and spherical popcorn, which is embodied in whether flat traditional corn or round popcorn is used. The popcorn popped by the two is very different. The former cannot burst round, while the latter The round shape can be almost perfect.
These are generally small popcorn machines that can be seen in movie theaters. They are generally heated by heating tubes or gas heating. Uneven heating can not automatically display the temperature control. Almost all are done by experience.
These small popcorn machines can also be sold as commercial popcorn machines, produced on site, with a free incubator function, and always maintain the crispy taste of popcorn. If you want to produce popcorn in large quantities, you have to leave the factory for large commercial popcorn machines.
As shown in the figure, large commercial popcorn machines are generally electromagnetic heating or gas heating, and the power is generally above 20KW. Power and three-phase alternating current are used to drive and heat, the efficiency is greatly improved, and electromagnetic popcorn The machine can also monitor the temperature in the pot in real time, effectively control the fire time and time of the popcorn, and the popcorn popped is more crispy and delicious.
Large commercial popcorn machines and physical maps of popcorn lines. There are two general commercial popcorn machines. One is electromagnetic popcorn machine, the other is gas popcorn machine. The style and appearance are similar, the only difference is the heating method of the pot body. The principle of electromagnetic heating is the same as that of the electromagnetic oven. The eddy current generated by the electromagnetic coil is used to directly heat the pot body, which is the method with the highest electrothermal conversion efficiency. A temperature control detection probe is reserved in the middle of the pot body. Continuous heating and stirring to prevent the raw materials and syrup from sticking to the process. Evenly, the syrup is wrapped on the corn kernels, so that the popcorn pops taste even and crisp.
Another part of the popcorn machine line is the conveyor belt and air-drying system, collecting baskets, etc. The conveyor belt conveys the popcorn out of the pot, but the popcorn at this time is hot and sticky, sticking or sticking to the teeth, and the water is not fully evaporated It needs to be sent to the assembly line for air-drying and sifting. Small debris will be filtered and blown away, leaving a large plump popcorn for air-drying and cooling, so the popcorn taste will be sweet and crispy.
In general, the amount of syrup will determine the sweetness and crispness of popcorn. Under the condition that the taste is not too sweet, the more syrup, the more crispy. There will be a thin layer of syrup on the outside of the popcorn. Crispy effect, at the same time, it is not easy to be invaded by moisture in the air and lose the crisp taste.
In general, we all prefer popcorn with pop caramel flavor, which is to replace white granulated sugar with caramel. The color is darker and the taste is more crispy. They are relatively sweet, but the caramel flavor will be relished.
If you are interested in popcorn technology or popcorn equipment, you can contact our sales consulting hotline: Come and exchange the processing technology and equipment use methods of popcorn machine.
For ball shape popcorn machine more products,please click:https://www.candyfiremixer.com/popcornmachine/
The popcorn machine uses a non-stick edible coating and is equipped with a stainless steel upper mixer, which can further improve the quality and output of food and greatly improve the production efficiency and quality of popcorn.
The Longze brand popcorn machine can burst butterfly-shaped popcorn and spherical popcorn, which is embodied in whether flat traditional corn or round popcorn is used. The popcorn popped by the two is very different. The former cannot burst round, while the latter The round shape can be almost perfect.
These are generally small popcorn machines that can be seen in movie theaters. They are generally heated by heating tubes or gas heating. Uneven heating can not automatically display the temperature control. Almost all are done by experience.
These small popcorn machines can also be sold as commercial popcorn machines, produced on site, with a free incubator function, and always maintain the crispy taste of popcorn. If you want to produce popcorn in large quantities, you have to leave the factory for large commercial popcorn machines.
As shown in the figure, large commercial popcorn machines are generally electromagnetic heating or gas heating, and the power is generally above 20KW. Power and three-phase alternating current are used to drive and heat, the efficiency is greatly improved, and electromagnetic popcorn The machine can also monitor the temperature in the pot in real time, effectively control the fire time and time of the popcorn, and the popcorn popped is more crispy and delicious.
Large commercial popcorn machines and physical maps of popcorn lines. There are two general commercial popcorn machines. One is electromagnetic popcorn machine, the other is gas popcorn machine. The style and appearance are similar, the only difference is the heating method of the pot body. The principle of electromagnetic heating is the same as that of the electromagnetic oven. The eddy current generated by the electromagnetic coil is used to directly heat the pot body, which is the method with the highest electrothermal conversion efficiency. A temperature control detection probe is reserved in the middle of the pot body. Continuous heating and stirring to prevent the raw materials and syrup from sticking to the process. Evenly, the syrup is wrapped on the corn kernels, so that the popcorn pops taste even and crisp.
Another part of the popcorn machine line is the conveyor belt and air-drying system, collecting baskets, etc. The conveyor belt conveys the popcorn out of the pot, but the popcorn at this time is hot and sticky, sticking or sticking to the teeth, and the water is not fully evaporated It needs to be sent to the assembly line for air-drying and sifting. Small debris will be filtered and blown away, leaving a large plump popcorn for air-drying and cooling, so the popcorn taste will be sweet and crispy.
In general, the amount of syrup will determine the sweetness and crispness of popcorn. Under the condition that the taste is not too sweet, the more syrup, the more crispy. There will be a thin layer of syrup on the outside of the popcorn. Crispy effect, at the same time, it is not easy to be invaded by moisture in the air and lose the crisp taste.
In general, we all prefer popcorn with pop caramel flavor, which is to replace white granulated sugar with caramel. The color is darker and the taste is more crispy. They are relatively sweet, but the caramel flavor will be relished.
If you are interested in popcorn technology or popcorn equipment, you can contact our sales consulting hotline: Come and exchange the processing technology and equipment use methods of popcorn machine.
For ball shape popcorn machine more products,please click:https://www.candyfiremixer.com/popcornmachine/
Contact Us:
Shandong Longze Machinery Co.,Ltd
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.