Introduction to the installation and use of heat-conducting oil sauce cooking mixer machine
Installation of thermal oil sauce cooking mixer machine: (fire type)
1. When installing the heat-conducting oil sauce cooking mixer machine, place the whole wok on the round furnace body that has been made of bricks, and the bottom of the pot should be about 40 cm higher than the stove bar.
2. Press the oil filler on the upper oil inlet, and then connect the oil outlet on the bottom to the oil filler by piping.
3. Press the supporting motor on the motor frame, adjust the tightness of the triangle belt and whether the pulley is parallel.
4. Connect the motor and switching power supply.
5. Install the thermometer.
How to use sauce cooking mixer machine:
1. First select the thermal oil above 320.
2. First add 30 kg of thermal oil to the wok sandwich, preheat for half an hour, then add 10-16 kg before use.
3. Add water according to the dryness and wetness of the oil during use.
4. When the oil temperature rises to 120-125 degrees, you can put it into the pre-heated oil press and press it.
5. When warming up, it is necessary to use a warm fire to slowly rise, prohibit violent fires, and prevent the bottom of the pot from sinking.
6. The temperature of the wok should not exceed 250 degrees during the heating process.
7. Extinguish the fire after get off work.
Installation method of electric heating oil cooker mixer machine:
1. When installing the electric heat-conducting oil sauce cooker mixer machine, place the whole wok flat on the platform or on the stand. The stand should be stable and firm.
2. Press the oil filler on the upper oil inlet, and then connect the oil outlet on the bottom to the oil filler by piping.
3. Press the supporting motor on the motor frame, adjust the tightness of the triangle belt and whether the pulley is parallel.
4. Connect three heating tubes, motor and power supply. (Equipped with electric box, pay attention to distinguish between neutral and live wires)
5. After installing the thermometer and temperature control line. (The temperature control line interface is beside the heating tube)
How to use electric heating oil sauce cooker mixer machine:
1. First select the thermal oil above 320.
2. First add 30 kg of thermal oil to the wok sandwich, preheat for half an hour, and then add 10-16 kg before use
3. Add water according to the dryness and wetness of the oil during use.
4. When the oil temperature rises to 120-125 degrees, you can put it into the pre-heated oil press and press it.
5. Turn off the power after get off work.
For cooking mixer machine more products,please click:https://www.candyfiremixer.com/cookingmixermachine/saucecookingmachine/
For cooking mixer machine more products,please click:https://www.candyfiremixer.com/cookingmixermachine/saucecookingmachine/
Contact Us:
Shandong Longze Machinery Co.,Ltd
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.