Working principle of automatic food mixer:
The full-automatic food mixer is a hemispherical stainless steel pot with one-time stamping forming. The mixing mode adopts special inclined transmission, which is developed according to the principle of planetary motion. It makes the mixer fully contact with the pot, realizes the non integral transmission ratio of transmission revolution and rotation, and there is no dead angle of mixing in the pot. At the same time, it has the characteristics of non stick pot. It is very suitable for processing chili sauce, Hot pot bottom material boil high viscous material processing
Application of automatic food mixer:
It can be widely used in the heating and mixing of lotus seed paste, jam, stuffing, stir fry and other food factories. The combination transmission of stepless speed change, worm gear and reducer increases the mixing torque of cross shaft. The mixer made of Teflon scraper is used. In the process of material rolling and mixing, the mixer is in full contact with the pot body in all directions to ensure that there is no dead angle of mixing. The cover opening, discharging and resetting of the boiler body are controlled by mechanical transmission, which is very convenient for operation. The bottom of the pot heats up rapidly, keeping the original color, fragrance and taste of the raw materials. The frying efficiency is improved, the energy consumption is reduced, and the frying time is shortened.
Full automatic food mixer hydraulic arm return system: the arm return system uses the hydraulic station as the power source. When the hydraulic station is working, the output and input oil cylinders run smoothly, and there will be no stoppage or jamming of the air cylinders. The motor of the hydraulic station is 2.2kW, which is controlled and monitored by the safety travel switch when the boom is turned back. Multi switch interconnection protection control, to avoid accidents and losses caused by illegal operation of operators.
The hydraulic station is used as the power source for discharging and turning the boiler. During the operation of the hydraulic station, the output and input oil cylinders run smoothly without any pause or jamming. The motor of the hydraulic station is 2.2kW, which is controlled and monitored by the safety travel switch when the boom is turned back. Multi switch interconnection protection control, to avoid accidents and losses caused by illegal operation of operators.
There are three heating modes in the mezzanine boiler produced by Longze machinery, which are electric heating, steam heating, gas heating and electromagnetic heating. Gas heating is divided into natural gas heating and liquefied gas heating. If there is more heating method, customers will have more choice; if there is more choice, the application rate of mezzanine pot will be improved a lot.
Advantages and disadvantages of various heating methods of automatic food mixer:
1. Gas heating: fast temperature rise, fast cooling, frequency modulation and temperature control.
2. Electric heating: controllable temperature, adjustable frequency and even heating of heat transfer oil
3. Electromagnetic heating: eliminate the inertia phenomenon of heating, raise and lower the temperature rapidly and efficiently; there is no dead angle for heating, and the whole barrel is evenly heated; the electromagnetic coil is kept cool, so its service life is too long.
4. Steam heating: the maximum temperature is about 100 ℃, which is generally used for vertical mezzanine pot
Contact Us:
Shandong Longze Machinery Co.,Ltd
Company Phone: +86-536-6503337
Company Fax: +86-536-6018355
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.