From what aspects should you choose the American ball shape popcorn machine:
1. Need to pay special attention to buying real ball shape popcorn machine, imported or domestically does not matter. Don't buy fakes.
2. Pay attention to the heating temperature. The production of ball shape popcorn machine needs to heat the corn kernels to more than 200 degrees, and the heating temperature of the pot body is more than 300 degrees. If the stove head of the ball shape popcorn machine is not suitable or the quality is not good;
3. Under the high temperature of gas heating, the coating of the non-stick cooker will quickly fall off and become a special sticky pot; and the popcorn machine modified by the pressure cooker will quickly deform under the high temperature dry frying. The lifes wok of these two machines is extremely short, and novices are not aware of these problems.
So in general, to make American-style ball shape popcorn machine, just choose a thickened stainless steel pot and choose spherical corn, and you can produce it. No other requirements.
For example, the most common machine on the market today is a non-stick modified machine. Under the high temperature of gas heating, the coating quickly peeled off and became a special sticky pot. The non-stick coating is attached to the popcorn, and if eaten, it will cause serious harm to the human body. When heated to more than 300 degrees, the non-stick coating will also release toxic gases to harm the operator and people around the pot;
There is also a popcorn machine modified by some high-pressure cookers, and the pot body is rapidly deformed under such high temperature heating. The pot scale and the pot body are glued together and there is no way to brush, shovel, or stick the pot. Some designs even leak raw materials. The aluminum element is attached to the popcorn, and customers will hurt the body if eaten.
Large-scale machines have a relatively attractive appearance, but they have large energy consumption and low efficiency. More than one-third of the gas used to process a pot is wasted, the speed is slow, but the output is not large, because no matter how large the pot is, only a small part of the bottom of the pot is heated. The cost of using this machine is too high and the waste is serious.
Now the latest Lonze brand fully automatic large-scale commercial American-style popcorn machine uses a high-power electromagnetic popcorn machine, automatic temperature control heating system and one-key discharge control, convenient and fast, basically one pot, one pot in about three minutes It can pop about 5 kg of popcorn. The cost is reduced, the output is increased, and the taste is good. It is a popular hot popcorn machine on the market.
ball shape popcorn machine is an automatic industrialized commercial food processing equipment that integrates heating and stirring and frying. R & D and production of large-scale American commercial ball shape popcorn machine production and processing equipment.
The biggest advantage of the Longze brand ball shape popcorn machine is that large capacity heating production is suitable for commercial use, and after the heating is stopped, the pot body can be quickly separated from the heat source to prevent high temperature residual heat from causing paste pot. Longze brand ball shape popcorn machine can effectively save manpower, increase production rate and reduce production cost for enterprises through automated design and manufacturing. It is a necessary equipment for your business.
For ball shape popcorn machine more products,please click:https://www.candyfiremixer.com/popcornmachine/
Contact Us:
Shandong Longze Machinery Co.,Ltd
Tel:+86 13153609533
Whatsapp/Wechat: +86 13153609533
Company website: https://www.candyfiremixer.com/
E-mail: longzemachinery2@gmail.com
Address: Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Gussie
Please fill in the form and leave a clear message. We will contact you immediately.