How to maintain electromagnetic food cooking Jacketed kettle
How to maintain the jacketed kettle
1. After the pot has been used for 5 years, it is recommended to conduct a safety water pressure test. The interval between subsequent water pressure tests shall be carried out according to the requirements of the technical departments of various regions.
The pressure P water of the hydraulic test is determined according to the following conditions:
When the rated working pressure P is less than 0.6MPa, P water = 0.15MPa;
When the rated working pressure P=0.6-0.8MPa,
P water = P amount + 0.3MPa
2. The outer pot body of this pot is made of 4.0~5.5mm thick steel plate, steel grade A3. When the outer pot is reduced to less than 2mm after years of corrosion, it should be stopped.
3. The stainless steel welding of the food cooking Jacketed kettle and the welding of the joints of other stainless steel materials should use stainless steel electrodes Ao 102, Ao 107, Ao 132, and Ao 137. Other grades should not be used.
4. The steam inlet and outlet pipe joints leak steam. When tightening the nut does not solve the problem, add or replace the packing.
5. The pressure gauge and safety valve should be checked regularly, and if there is any failure, they should be replaced and repaired in time.
6. After 50 hours of use, the gearbox should be disassembled to drain the lubricating oil, rinsed with kerosene or diesel oil, and 30#-40# clean oil is added. After 150 hours of use, the oil should be changed for the second time. , Change the oil every 1000 hours of use.
7. If the anti-rust oil peels off, it should be painted in time, and the paint of the outer pot should be painted. X55-3 aluminum powder vinyl water-resistant paint is recommended.
The electromagnetic jacketed kettle has a wide range of applications, not only for stirring products, but also for frying some high-end products, and it can realize a variety of application methods for a jacketed kettle. For different products, we can provide you with different heating methods.
How to maintain the jacketed kettle
1. After the pot has been used for 5 years, it is recommended to conduct a safety water pressure test. The interval between subsequent water pressure tests shall be carried out according to the requirements of the technical departments of various regions.
The pressure P water of the hydraulic test is determined according to the following conditions:
When the rated working pressure P is less than 0.6MPa, P water = 0.15MPa;
When the rated working pressure P=0.6-0.8MPa,
P water = P amount + 0.3MPa
2. The outer pot body of this pot is made of 4.0~5.5mm thick steel plate, steel grade A3. When the outer pot is reduced to less than 2mm after years of corrosion, it should be stopped.
3. The stainless steel welding of the food cooking Jacketed kettle and the welding of the joints of other stainless steel materials should use stainless steel electrodes Ao 102, Ao 107, Ao 132, and Ao 137. Other grades should not be used.
4. The steam inlet and outlet pipe joints leak steam. When tightening the nut does not solve the problem, add or replace the packing.
5. The pressure gauge and safety valve should be checked regularly, and if there is any failure, they should be replaced and repaired in time.
6. After 50 hours of use, the gearbox should be disassembled to drain the lubricating oil, rinsed with kerosene or diesel oil, and 30#-40# clean oil is added. After 150 hours of use, the oil should be changed for the second time. , Change the oil every 1000 hours of use.
7. If the anti-rust oil peels off, it should be painted in time, and the paint of the outer pot should be painted. X55-3 aluminum powder vinyl water-resistant paint is recommended.
The electromagnetic jacketed kettle has a wide range of applications, not only for stirring products, but also for frying some high-end products, and it can realize a variety of application methods for a jacketed kettle. For different products, we can provide you with different heating methods.
Contact Us:
Shandong Longze Machinery Co.,Ltd
Company website:https://www.candyfiremixer.com/
WhatsApp/Wechat:+86 13153609533
Tel:+86 13153609533
E-mail:longzemachinery2@gmail.com
Address:Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Rena
Please fill in the form and leave a clear message. We will contact you immediately.