The large-scale commercial popcorn machine is mainly composed of a pot body, a frame body, a mixing system, a heating system, a speed-regulating transmission device, and a pot body turning system, etc. It uses a hemispherical stainless steel pot body formed by one-time stamping, and has two kinds of heating methods: electric heating and heat conduction oil heating. When the oil temperature rises to the set temperature, it will no longer be heated. The design of the three-layer boiler body not only improves the safety performance, but also makes sure that the oil temperature and heat preservation can last for a long time. It is the best heating way to save money.

As for stirring mode, the large-scale commercial popcorn machine adopts special tilting transmission, and the planetary agitator can fully touch the pot body to realize the non-integer transmission ratio of transmission revolution and rotation, so that there is no dead angle of mixing in the pot. The use of advanced transmission and sealing structure, so that the transmission part and the pot can always be clean. The use of frequency conversion speed regulation power makes the operation more stable. Furthermore, it employs hydraulic lift, which makes it easy to turn over the pot to transport the material. There is no need to disassemble and install the agitator, that can help our clients save manpower and reduce the labor intensity.

Product Features of Large-scale Commercial Popcorn Machine:

1. It adopts an one-time stamping molding stainless steel pot body with discharge port, and the roundness error is small.
2. The use of electric heating heat conduction oil heating has the advantages of large heating area, even heating. The temperature can be adjusted and controllable because it is equipped with a temperature controller to meet the requirements of high viscosity material operation.
3. Speed regulating transmission device: the stirring shaft uses advanced rotation and sealing structure, so that the pot is clean and sanitary; Speed regulation adopts frequency conversion speed regulation power, which makes the mixing shaft run smoothly.
4. The turnover system of pot body: it employs a hydraulic lifting mode to achieve that the stirring shaft and pot body can be separated when discharging the popcorn.